A versatile belay / rappel device, that can also be used in guide mode

Overview

The Grivel Master Pro was created for belaying and rappelling. It is a versatile, dynamic and reliable tool to minimise the force transmitted to the anchors, the belay and the wear and tear over time of the rope.

It can also be used in guide mode as a self-locking plate, to belay a second.

The two "horns" that are placed at one of the two ends have two main functions: Additional braking with thin ropes by passing them below the horns themselves, and the possibility of hooking a webbing ring for a release maneuver.

Its body has been designed with a series of holes on the sides to reduce weight, but above all to disperse the heat and consequently not to overheat the rope that passes into it.

As with all tubes, the use of gloves is recommended for greater guarantee in braking the ropes when belaying the first climber from the harness.

It can be used both on single pitch climbs, on a multipitch route, and on a classic wall where you don't want to stress the anchors.

Weight: 88 grams

Features

• A single device for belaying the leader, one or two seconding climbers and for rappelling
• Extra friction V slots add more control and smoothness during maneuvers
• When belaying seconds, can be used as an assisted speed control belay
• Can also be used as an ascender
• Cooling Technology inner holes allow more airflow therefore less heat build and a lighter object. It also gives easier access to remove snow/ice and mud

Technical Specs

• Materials: Aluminum
  
• Certifications: EN 15151 -2, UIAA 129-5
• Rope dimensions: 7.3 - 11 mm
• Weight: 88g (3.1 oz)